O projeto TOFFEE
CASADOCUMENTAÇÃOATUALIZAÇÕESVÍDEOSPESQUISADESCARREGARPATROCINADORESCONTATO


DOCUMENTATION 》 TOFFEE-Butterscotch Documentation :: TOFFEE-Butterscotch-1.0.11-rpi2-23-nov-2016

Download TOFFEE-Butterscotch-1.0.11-rpi2-23-nov-2016.img via Google Drive share:
Raspberry Pi2/3 Install Image (pre-install OS Image including source): TOFFEE-Butterscotch-1.0.11-rpi2-23-nov-2016.img.tar.xz

Software Development Updates corresponds to this TOFFEE-Butterscotch release version:
NEWS :: TOFFEE-Butterscotch Bandwidth saver software development - Update: 17-Nov-2016
NEWS :: TOFFEE-Butterscotch Bandwidth saver software development - Update: 28-Oct-2016
NEWS :: Introducing TOFFEE-Butterscotch - Save and Optimize your Internet/WAN bandwidth

Release Notes:
NEWS :: First TOFFEE-Butterscotch Code Release

User Guide (Documentation)
TOFFEE-Butterscotch is a variant of TOFFEE can be used to save and optimize your Home/SOHO Internet/WAN bandwidth. Unlike TOFFEE (and TOFFEE-DataCenter) TOFFEE-Butterscotch is a non peer-to-peer (and asymmetric) network optimization solution. This makes TOFFEE-Butterscotch an ideal tool for all Home and SOHO users. Here is the deployment topology of TOFFEE-Butterscotch deployment. You can deploy the same either before your WiFi router or after your router whichever is feasible as shown below.
TOFFEE-Butterscotch Internet WAN Bandwidth Saver topology

For example you can optimize your slow and expensive 3G/4G Mobile networks:
TOFFEE-Butterscotch Internet WAN Bandwidth Saver topology 3G and 4G Mobile Networks [CDN]

The TOFFEE-Butterscotch-1.0.11-rpi2-23-nov-2016 release is highly optimized and customized for Raspberry Pi 2/3 hardware platform and it is built within the standard Raspberry Pi Raspbian Jessie with PIXEL Operating System (version: 2016-09-23-raspbian-jessie.img).

Installation: TOFFEE-Butterscotch Raspberry Pi version is a complete disk image of Raspberry Pi Raspbian OS in which TOFFEE-Butterscotch is built and pre-installed. You can download the binary (the install image above), un-tar it and install on a microSD card which is around larger than or equal to 8GB capacity. Since this is the size of the microSD card upon which I built the TOFFEE-Butterscotch image.

You can follow the standard official Raspberry Pi guide for general Raspberry Pi OS image install steps: Installing operating system images

If you are using a Linux system you can do via dd command as shown below. Assume in this case the empty microSD card is "/dev/sdc"

[email protected]:~$ sudo dd bs=4M if=TOFFEE-Butterscotch-1.0.11-rpi2-23-nov-2016.img conv=sync,noerror of=/dev/sdc

Hardware :: Additional NIC Card Installation: You can use a USB2 to 100Mbps NIC card so that you can get totally two network ports as shown below. Once it is installed you can check and confirm via ifconfig command as shown below:
TOFFEE-Butterscotch Raspberry Pi device interfaces [CDN]

Configuration: Once you are done with Installation, you can boot TOFFEE-Butterscotch OS image. As you can see the entire Raspbian Jessie with PIXEL is customized so that it looks minimal and has this polished interface.
TOFFEE_Butterscotch [CDN]

TOFFEE-Butterscotch GUI: You can now access the TOFFEE-Butterscotch GUI via your Google Chrome browser as shown below.
The default username is: root and the password is: welcome

URL: http://localhost/toffee_butterscotch
TOFFEE_Butterscotch Login

Home page: Once you login you will get this first HOME page.
TOFFEE_Butterscotch Home Page

Wizard: You can now configure TOFFEE-Butterscotch ports (and activate Linux kernel bridge) via wizard as shown below.
NOTE: Select appropriate LAN and WAN ports. Swapping these ports may cause connectivity issues and performance degradation.
TOFFEE_Butterscotch Wizard [CDN]
TOFFEE_Butterscotch Wizard select LAN Port [CDN]
TOFFEE_Butterscotch Wizard select WAN Port [CDN]
TOFFEE_Butterscotch Wizard finish [CDN]

Ports: You can see below the ports are configured and the Linux kernel bridge is activated.
TOFFEE_Butterscotch ports [CDN]

Basic Settings: You can do TCP throttle and Torrent traffic throttle as shown below. For more details kindly refer documentation/help in the page.
TOFFEE_Butterscotch Throttle TCP
In my case the overall download and upload speed of my Internet connection is 55Mbps and 49Mbps so I am setting 60Mbps as my average WAN speed for better TCP performance via TCP throttle feature.
TOFFEE_Butterscotch Basic Settings [CDN]

Filter: With filter feature you can block specific types of packets as shown below. For more details kindly refer documentation/help in the page.
TOFFEE_Butterscotch Packet Filter [CDN]

Real time stats: Monitor real time data-consumption (or data-transferred) stats.
TOFFEE_Butterscotch Live performance stats

Big-picture: Anytime you can view and confirm your settings via Big Picture. Big Picture is a neat graphical illustration of your overall TOFFEE-Butterscotch settings. You can view any time as a reference or even print and file it as a record if you are a Network Admin.
TOFFEE_Butterscotch Big Picture

After sometime you should see the updated home page reports once you start using the TOFFEE-Butterscotch Raspberry Pi Bandwidth saver device as shown below:
TOFFEE_Butterscotch Home Page Report [CDN]

Licence and About pages:
TOFFEE_Butterscotch License [CDN]
TOFFEE_Butterscotch About

TOFFEE-Butterscotch source: You can find its source code within the home folder(/home/pi) as shown below:
TOFFEE-Butterscotch Raspberry Pi Source-code [CDN]

TOFFEE-Butterscotch future road-map: This is the first release of TOFFEE-Butterscotch open-source Bandwidth saver software. Currently as one can understand the features supported in the same are quite limited. But in future you should get more and more new features being supported in the same. If you need any specific features, you can post your new feature requests to me, and if they are plausible they should get supported in the same eventually.



Tópicos sugeridos:


TOFFEE-Butterscotch - Save and Optimize your Internet/WAN bandwidth


Categories

💎 TOFFEE-MOCHA new bootable ISO: Download
💎 TOFFEE Data-Center Big picture and Overview: Download PDF


Tópicos recomendados:

iPerf Network Optimization - WAN Optimization Demo ↗
Saturday' 13-Mar-2021

TEST CASES :: TEST RESULTS :: TOFFEE-Mocha-1.0.32 asymmetric constant packet delay feature ↗
Saturday' 13-Mar-2021

TOFFEE (and TOFFEE-DataCenter) optimized Mobile Wireless Backhaul Networks ↗
Saturday' 13-Mar-2021
TOFFEE can be used to optimize expensive Wireless backhaul network infrastructure. TOFFEE can be deployed over existing slow or often outdated old backhaul networks too. This will leverage mobile ISPs and network service providers to reduce their bulk IT CapEx and OpEx Costs.

CDN Introduction - Content Delivery Networks or Content Distribution Networks ↗
Saturday' 13-Mar-2021

Tweaking Network Latency - Live Demo - via TOFFEE-DataCenter ↗
Saturday' 13-Mar-2021

VPN Network Optimization via TOFFEE WAN Optimization ↗
Saturday' 13-Mar-2021
VPN Networks may degrade network performance due to various packet processing overheads such as encryption and by adding extra network protocol header(s) (such as IPv4/IPv6, IPSec, etc). This may inflate near MTU sized packets and causes excessive packet fragmentation. Here are the few examples of packet processing involved in a VPN (or a VPN like) Tunnel. With TOFFEE you can optimize these packets even before they get processed on to a VPN device. TOFFEE optimizes packet contents (application payload and transport headers) so that these TOFFEE optimized packets when they get processed by VPN devices (or VPN software stack) they may never need further packet fragmentation. Here is a deployment scenario of TOFFEE with VPN devices.

Assista no Youtube - [976//1] 293 - iPerf Network Optimization - WAN Optimization Demo ↗


PiPG - Raspberry Pi Network Packet Generator ↗
Saturday' 13-Mar-2021
PiPG is a powerful and yet simple Raspberry Pi Network Packet Generator. With PiPG you can now fabricate custom network packets and send via any Network Interface. Supports all kinds of standard Network Ports (Linux Kernel driver generated) such as Physical Network Interface ports, and an array of virtual ports such as loopback, tun/tap, bridge, etc. indispensable tool for: Network Debugging, Testing and Performance analysis Network Administrators Students Network R&D Protocol Analysis and Study Network Software Development Compliance Testing Ethical Hackers you can generate the following test traffic: L2-Bridging/Slow protocols: STP, LACP, OAM, LLDP, EAP, etc Routing protocols: RIPv1, RIPv2, IGMPv1, IGMPv2, OSPF, IS-IS, EIGRP, HSRP, VRRP, etc Proprietary protocols: CISCO, etc Generic: IPv4 TCP/UDP, etc Malformed random packets

Optimization of network data (WAN Optimization) at various levels ↗
Saturday' 13-Mar-2021
WAN Network data can be optimized at various levels depending upon the network applications, protocols, topology and use-cases. So the amount of data you can optimize will depend on the strategy you choose to optimize. Such as: Network Packet level optimization, Session level optimization, File level optimization, etc.

TOFFEE (and TOFFEE-DataCenter) deployment with web-proxy cache ↗
Saturday' 13-Mar-2021
If you want to deploy TOFFEE along with a web-proxy cache (such as Squid Proxy) you can deploy the same as shown below. TOFFEE does not cache files. TOFFEE does packet level network optimization. So if you want caching your web content you can use transparent mode web-proxy cache intercepting your WAN links. A web-proxy may reduce amount of data being processed (optimized) within these TOFFEE devices and so reduce the CPU overheads and improve its performance.

Tracking Live TCP Sessions (connections) - WAN Optimization Device ↗
Saturday' 13-Mar-2021



Featured Educational Video:
Assista no Youtube - [8507//1] x254 Kernel Init Code without Kernel Module - Kernel Programming Tip #linode ↗

TOFFEE-Mocha-1.0.32-1-x86_64 and TOFFEE-Mocha-1.0.32-1-i386 Code Release ↗
Saturday' 13-Mar-2021
This is my first TOFFEE-Mocha combined x86-64 and i386 (Intel x86 64-bit and 32-bit) code release.

Benchmark Raspberry Pi and other embedded SoC with TrueBench ↗
Saturday' 13-Mar-2021
TrueBench is an unique open-source benchmarking system in which the core system performance and efficiency parameters are measured at extreme high resolution in the order of several million/billion µ-seconds for a given specific task. TrueBench is a part of The TOFFEE Project research. With TrueBench Raspberry Pi 3, Raspberry Pi 2B and Raspberry Pi 2 are benchmarked and you can do a comparative analysis with standard mainstream x86 devices.

TOFFEE-DataCenter WAN Optimization :: TOFFEE-DATACENTER-1.3.25-1-portable ↗
Saturday' 13-Mar-2021
Download TOFFEE-DATACENTER-1.3.25-1-portable.tar.xz via Google Drive share: platform independent (portable) source: TOFFEE-DATACENTER-1.2.2-1-portable.tar.xz * Alternatively download from SOURCEFORGE project site. * Here are the TOFFEE-DataCenter supported features. * To know more about the project kindly refer TOFFEE-Datacenter Documentation, News and Updates

Setting up a WAN Emulator within VirtualBox ↗
Saturday' 13-Mar-2021




Setting up a WAN Emulator within VirtualBox ↗
Saturday' 13-Mar-2021



Research :: Optimization of network data (WAN Optimization) at various levels:
Network File level network data WAN Optimization


Learn Linux Systems Software and Kernel Programming:
Linux, Kernel, Networking and Systems-Software online classes


Hardware Compression and Decompression Accelerator Cards:
TOFFEE Architecture with Compression and Decompression Accelerator Card [CDN]


TOFFEE-DataCenter on a Dell Server - Intel Xeon E5645 CPU:
TOFFEE-DataCenter screenshots on a Dual CPU - Intel(R) Xeon(R) CPU E5645 @ 2.40GHz - Dell Server